AIREND SCA7

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
First rotor size: 59.7 mm
Second rotor size: 49.7 mm
Pressure: 3 times per minute at low level / 13 times per minute at high level
Weight: 10 kg

order form

AIREND SCA8

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 74 mm
Second rotor size: 61.6 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 22 kg

order form

AIREND SCA9

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 108.6 mm
Second rotor size: 90.4 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 40 kg

order form

AIREND SCA10

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 108.6 mm
Second rotor size: 90.4 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 45 kg

order form

AIREND SCA13

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 126 mm
Second rotor size: 105 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 74 kg

order form

AIREND SCA14

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 147.3 mm
Second rotor size: 122.6 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 108 kg

order form

AIREND SCA18 – ITA18

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 217 mm
Second rotor size: 183 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 429 kg

order form

AIREND SCA19

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 186 mm
Second rotor size: 154.8 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 263 kg

order form

AIREND SCA20

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum

Lobe composition: 5.6

The size of the first rotor: 217 mm

Second rotor size: 183 mm

Pressure: 3 times per minute at low level / 15 times per minute at high level

Weight: 393 kg

order form

AIREND SCA22

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 217 mm
Second rotor size: 183 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 429 kg

order form

AIREND SCA25 – ITA23

AIR CONDITIONING UNIT

product introduction

Air-end is placed in the screw compressor device and is responsible for producing air.

All air conditioning units of Behsan compressors are Italian thermomechanical type.

Main features:

High volumetric efficiency
Low running cost
Low air discharge temperature
low noise
Discharge pressure range 3 bar to 15 bar (43.5 psig to 220 psig) Higher pressure on request Double lip PTFE seal

Assembly system

SCA series assembly systems include:

Base plate installed
Flange installed

Technical Specifications

Rotor material: Aluminum
Lobe composition: 5.6
The size of the first rotor: 217 mm
Second rotor size: 183 mm
Pressure: 3 times per minute at low level / 15 times per minute at high level
Weight: 429 kg

order form

AIREND SCA7

AIREND SCA8

AIREND SCA9

AIREND SCA10

AIREND SCA13

AIREND SCA14

AIREND SCA18 – ITA18

AIREND SCA19

AIREND SCA20

AIREND SCA22

AIREND SCA25 – ITA23

Contact us

Social